HORNBY

Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set).Yo...

This Plastic Buffer Stop clips to both straight or curved tracks and measures at 44mm.

The Junction Home Signal represents the type of signal used on the approach to points. The taller signal controls the main line and are commonly se...

Measuring at a height of 121mm, the red arms are often seen prior to signals with yellow arms, which signify 'distant' or 'caution'. If your railwa...

Measuring at a height of 121mm, the yellow arms signify 'distant' or 'caution', and are seen prior to signals with red arms. If your railway layout...

Carries a single track over road or stream.Length: 111mm, Height (level to level): 80mm.

This Hydraulic Buffer Stop comes complete with spring-loaded buffers and clips to both a straight or curved track.

Fits outside second-radius curved track and clips to other Hornby platform sections.Length: 212mm.

Fencing not included.Length: 127mm.

Hornby Straight Track piece, measuring in at 168mm in length.

The Hornby double straight track has a length of 335mm.

The power connecting clip is used for the electrical connections to the track.

670mm Hornby Long Straight.

1st radius (371mm) standard curve arc, covering an angle of 22.5°.

1st Radius (371mm) double curve arc, covering an angle of 45°.

This blister pack contains 4x R606 2nd Radius Curve pieces.Each piece measures at 2nd Radius 438mm and has an arc of 22.5°.

This track has a radius of 438mm, arc of 45° and a length of 380mm.

This track has a radius of 505mm and arc of 22.5°.

The Double Curve - 3rd Radius track has a radius of 505mm, arc of 45° and measures at 405mm in length.

The Quarter Straight track piece has a length of 38mm.

Length of 168mm x 181mm and angle of 22.5°. For parallel tracks use with 22.5° section curve or point.

Length of 168mm x 181mm and angle of 22.5°. For parallel tracks use with 22.5° section curve or point.

This spring-loaded ramp clips into straight track at the position you choose, and automatically lifts couplings when the train is halted over the r...

This Double Isolating Track has a length of 168mm, a black painted finish and is used to isolate track sections over both rails.