Products

Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set).Yo...

Measuring at a height of 121mm, the red arms are often seen prior to signals with yellow arms, which signify 'distant' or 'caution'. If your railwa...

Measuring at a height of 121mm, the yellow arms signify 'distant' or 'caution', and are seen prior to signals with red arms. If your railway layout...

Brick-built type triple arch supporting a single line of track. Length: 332mm, Height (level to level): 80mm.

Carries a single track over road or stream.Length: 111mm, Height (level to level): 80mm.

This Hydraulic Buffer Stop comes complete with spring-loaded buffers and clips to both a straight or curved track.

Clips into other Hornby platform sections for easy, fuss-free and flexible layout extension.Length: 168mm.

Fits outside second-radius curved track and clips to other Hornby platform sections.Length: 212mm.

Length: 136mm.

Fencing not included.Length: 127mm.

Total length 1830mm and contains six lengths of fencing, 305mm each, supported by clips which engage in the track's standard slots.

This pack contains: huts, telegraph poles, water crane, loading gauge, whistle sign and mile and gradient posts.

The Hornby double straight track has a length of 335mm.

The power connecting clip is used for the electrical connections to the track.

670mm Hornby Long Straight.

1st radius (371mm) standard curve arc, covering an angle of 22.5°.

1st Radius (371mm) double curve arc, covering an angle of 45°.

This blister pack contains 4x R606 2nd Radius Curve pieces.Each piece measures at 2nd Radius 438mm and has an arc of 22.5°.

This track has a radius of 438mm, arc of 45° and a length of 380mm.

This track has a radius of 505mm and arc of 22.5°.

The Quarter Straight track piece has a length of 38mm.

Length of 168mm x 181mm and angle of 22.5°. For parallel tracks use with 22.5° section curve or point.

This spring-loaded ramp clips into straight track at the position you choose, and automatically lifts couplings when the train is halted over the r...

This Double Isolating Track has a length of 168mm, a black painted finish and is used to isolate track sections over both rails.

The special Hornby coupling unit allows rolling stock to be connected together, or separated, without having to be touched by hand. If fitted at th...

The Half Curve (33") Large Radius track has a Radius of 852mm, arc of 11.25° and measures at 180mm in length. For use with R8076 'Y' Point.

This Half Curve - 2nd Radius track measures at 111mm in length, has a Radius of 438mm and an arc of 11.25°.

This set of seven piers in various heights clip to the underside of Hornby track to create a smooth incline, whether it's straight or curved track....

Elevated Track Running Length: The maximum track running length to a height of 80mm with supports at 24 sleeper intervals is approximately 1344m...

Designed to fit curved or straight track on piers R658 and R659.Total length: 1220mm. Elevated Track Running Length The maximum track running...

Includes the Santa Express train in OO Scale, an oval of Hornby track, and a Hornby Controller with Australian power supply.

Includes the Princess train, an oval of Hornby track, and a Hornby Controller with an Australian power supply.

Includes the Eurostar train, an oval of Hornby track, and a Hornby Controller with an Australian power supply.

Info from Hornby's website: The most famous locomotive and train in the world features in this superb Hornby train set. The striking apple green...

Contains the Valley Drifter train, an oval of Hornby Track, and a Hornby Controller with an Australian Power Supply.

Important info from Hornby: Please note: HM | DC requires pairing to HM6000 &/OR HM6010 units; please note that the phone or tablet being us...

Contains the Summertime Coke train, an oval of Hornby Track, and a Hornby Controller with Australian power supply.

Contains the Network Traveller train, an oval of Hornby Track, and a Hornby controller with Australian power supply.

Contains the Red Rover train, an oval of Hornby Track, and a Hornby Controller with Australian power supply.

Please note, this product does not ship with a transformer. What's Inside 1x Locomotive Steam 2x Rolling Stock 1x Track & Accessories

History from Hornby's website: Product Info 'Qwag' or No. 371971 has had a long association with the Great Central Railway, having been the f...

History from Hornby's Website: The Class 87 locomotive design resulted from a requirement for a more powerful mixed traffic electrical locom...

History from Hornby's Website: The Class 87 locomotive design resulted from a requirement for a more powerful mixed traffic electrical locom...

History from Hornby's Website: Power Car 43004 entered service in September 1976 and was one of the prototypes for the Brush MTU engine upgrade,...