Products

Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set).Yo...

This Plastic Buffer Stop clips to both straight or curved tracks and measures at 44mm.

670mm Hornby Long Straight.

1st radius (371mm) standard curve arc, covering an angle of 22.5°.

1st Radius (371mm) double curve arc, covering an angle of 45°.

This blister pack contains 4x R606 2nd Radius Curve pieces.Each piece measures at 2nd Radius 438mm and has an arc of 22.5°.

This track has a radius of 438mm, arc of 45° and a length of 380mm.

This track has a radius of 505mm and arc of 22.5°.

The Double Curve - 3rd Radius track has a radius of 505mm, arc of 45° and measures at 405mm in length.

The Quarter Straight track piece has a length of 38mm.

Length of 168mm x 181mm and angle of 22.5°. For parallel tracks use with 22.5° section curve or point.

Length of 168mm x 181mm and angle of 22.5°. For parallel tracks use with 22.5° section curve or point.

This spring-loaded ramp clips into straight track at the position you choose, and automatically lifts couplings when the train is halted over the r...

This Double Isolating Track has a length of 168mm, a black painted finish and is used to isolate track sections over both rails.

The special Hornby coupling unit allows rolling stock to be connected together, or separated, without having to be touched by hand. If fitted at th...

The Half Curve (33") Large Radius track has a Radius of 852mm, arc of 11.25° and measures at 180mm in length. For use with R8076 'Y' Point.

Measuring at 168mm in length, this double crossing comes with track mounded into the base at intervals to suit standard Hornby twin-track geometry....

This Half Curve - 2nd Radius track measures at 111mm in length, has a Radius of 438mm and an arc of 11.25°.

Measuring at 168mm in length, this crossing comes with traditional gates and alternative lifting booms. Road sections clip around any straight sect...

Designed to fit curved or straight track on piers R658 and R659.Total length: 1220mm. Elevated Track Running Length The maximum track running...

The point motor is designed to allow for the convenient electrical operation of points. The point motor also has a 5 pole skew wound and measures a...

Measures at 168mm long with a curve radius of 438mm and an arc of 22.5°.

Measuring at 168mm in length along the straight and covering a second radius (438mm) curve of 22.5°. Hornby points are supplied for operation by ha...

Each track has a radius of 438mm and arcs at 22.5° and 33.75°. Hornby points are supplied for operation by hand and they may be converted to remote...

Each track has a radius of 438mm and arcs at 22.5° and 33.75°. Hornby points are supplied for operation by hand and they may be converted to remote...

This track has a length of 245mm, radius of 852 and arc of 11.25°.Hornby points are supplied for operation by hand and they may be converted to rem...

Comes in a pack of 20 and are for the use of connecting to your existing track, and that in your layout, to create those extra electrical points as...

4th Radius arc 22.5° track has a length of 235mm.

Double curve 4th Radius 572mm arc 45° track has a length of 450mm.