Sale

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500)...

This is an above board point motor that requires momantary AC currect to operate. Clips directly into a Peco 00/H0 Setrack Turnout, either Left ...

Conducting Rail Joiners - Nickel silver for both Code 55 and Code 80 track

204mm track feed wires ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily ex...

Often referred to as "Crazy Track". For narrow gauge models built to either 00 (4mm) or H0 (3.5mm) scale and running on 9mm gauge track, this range...

Abrasive rubber block for removing dirt and oxidisation from the rail surface. Improves running, particularly at low speeds.

Insulated Rail Joiners - Plastic for both Code 55 and Code 80 track. Design prevents adjacent rails from touching whilst holding them in alignment....

Length: 168mm Frog Angle: 22.5 Degrees Radius: 438mm

Length: 87mm Frog Angle: 22.5 Degrees Radius: 228mm

Length: 168mm

Length: 125mm Frog Angle: 19.5 Degrees Radius: 304mm

Length: 914mm / 36inch

Length: 87mm Frog Angle: 22.5 Degrees Radius: 228mm

Length: 125mm Frog Angle: 19.5 Degrees Radius: 304mm

This is an under board mounted point motor that requires momentary AC current to operate. An extended drive pin is fitted, use the PL-9 Mounting...

Length: 174mm

Use SL-310 metal joiners and SL-1208 joining sleepers. Use SL-311 insulating joiners to create isolated track sections (if using DCC control these ...

Length: 335mm

14mm, chemically blackened mild steel. Works with all flexible track systems.

Frog Angle: 45 Degrees Radius: 438mm

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500)...

Length: 670mm

204mm track feed wires ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily ex...