Lighting and electrical

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors.

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors

Provides the short burst of current required to operate the PL-11 and PL-10 series of Turnout Motors.

Houses 6 PL-26 Passing Contact Switches, PL-22 On/Off Switches or PL-23 On/On Switches.

Use these when creating a diagrammatic control panel to clip fit PL-26 Passing Contact Switches, PL-22 On/Off Switches and PL-23 On/On Switches in ...

Push on Terminal Connectors and shrouds. These connectors make modification and fault finding so much easier than soldered wiring. Use them to conn...

Open type, as used on the PL-15 Twin Microswitch. Rated 16v 2amps (continuous) or 2.5amps (momentary)

Closed type, rated 16v 2amps (continuous) or 2.5amps (momentary). Use this microswitch with the PL-19 Microswitch Housing for polarity switching th...

Makes wiring the PL-10 series of Motors quick and easy. Just a simple push fit onto the motor terminals; the other ends are tinned and ready for th...

For use with all solenoid motors (e.g. PL-10 and Pl-11). Connect this unit to the 16v ac supply on your transformer. The capacitor stores up power ...

Abrasive rubber block for removing dirt and oxidisation from the rail surface. Improves running, particularly at low speeds.

Enables switches to be connected without any need for soldering. Power is supplied through the fitted leads and each switch is automatically connec...

Allows the PL-50 Switch Module to be extended to any size required.

Non-indexing turnatable motor (which means that there are no pre-set or programmable settings) means that the modeller can simply line up the deck ...

The Kit contains Power Lube, Wheel Cleaning Brush and Scraper and the Locomotive Servicing Cradle which enables locomotives and rolling stock to be...

204mm track feed wires ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily ex...

204mm track feed wires ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily ex...

204mm track feed wires ready soldered to rail joiners. Quick and easy to use, avoids the risk of damage to sleepers from soldering irons. Easily ex...

Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set Dimensions - 0.764" w x 3.449" h (19.4 mm w x 87.6 mm...

Use to light street corners, sidewalks, parks and more. 20mA set Dimensions - 0.484" w x 2.76" h (12.3 mm w x 70.1 mm h) RoHS Compliant

Use to light street corners, residential walkways, parks and more. 20mA set Dimensions - 0.185" w x 2.071" h (4.7 mm w x 52.6 mm h) RoHS C...

Use to light depots, rail yards, alley ways, sidings, parking lots and more. Wooden Pole Street Lights are compatible with the Just Plug® Lighting ...

Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set Dimensions - 0.417" w x 1.874" h (10.6 mm w x 47.6 mm...

Use to light street corners, sidewalks, parks and more. 20mA set Dimensions - 0.264" w x 1.5" h (6.7 mm w x 38.1 mm h) RoHS Compliant

Use on homes, business entry ways, garages and more. 20mA set Dimensions - 0.193" w x 0.197" h (4.9 mm w x 5.0 mm h) RoHS Compliant

Add distinctive detail to your layout. Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set HO scale dimen...

Add distinctive detail to your layout. Use to light city streets, sidewalks, downtown areas, parks, bridges and more. 20mA set HO scale dimen...

Use the Port Sharing Device with a Light Hub or Sequencing Light Hub to add up to four Stick-On or Nano LED Lights per Light Port.

Information from Woodland Scenics' website: Use the Expansion Hub to connect up to four Light Hubs or Sequencing Light Hubs, expanding your Just...

The Tidy Wire Kit gives you easy access for expansion while keeping cables secure and tidy. Use the Wire Tie Labels to identify connections. K...

From Woodland Scenics' website: Simply plug into Light Hub. Available in a variety of colors and adhesive-backed for easy installation. NOTE:...

From Woodland Scenics' website: Simply plug into Light Hub. Available in a variety of colors and adhesive-backed for easy installation. NOTE:...

From Woodland Scenics' website: Simply plug into Light Hub. Available in a variety of colors and adhesive-backed for easy installation. NOTE:...

From Woodland Scenics' website: Simply plug into Light Hub. Available in a variety of colors and adhesive-backed for easy installation. NOTE:...

From Woodland Scenics' website: Ready to plug into Light Hub. Simulates individual bulb and available in a variety of colors. NOTE: Nano LED ...