Products

Drive the locomotive onto the turntable, then switch the power from track to turntable via the 'on-on' lever switch R046 (supplied with the set).Yo...

The Hornby double straight track has a length of 335mm.

The power connecting clip is used for the electrical connections to the track.

670mm Hornby Long Straight.

1st radius (371mm) standard curve arc, covering an angle of 22.5°.

1st Radius (371mm) double curve arc, covering an angle of 45°.

This blister pack contains 4x R606 2nd Radius Curve pieces.Each piece measures at 2nd Radius 438mm and has an arc of 22.5°.

This track has a radius of 438mm, arc of 45° and a length of 380mm.

This track has a radius of 505mm and arc of 22.5°.

The Quarter Straight track piece has a length of 38mm.

Length of 168mm x 181mm and angle of 22.5°. For parallel tracks use with 22.5° section curve or point.

This spring-loaded ramp clips into straight track at the position you choose, and automatically lifts couplings when the train is halted over the r...

This Double Isolating Track has a length of 168mm, a black painted finish and is used to isolate track sections over both rails.

The special Hornby coupling unit allows rolling stock to be connected together, or separated, without having to be touched by hand. If fitted at th...

The Half Curve (33") Large Radius track has a Radius of 852mm, arc of 11.25° and measures at 180mm in length. For use with R8076 'Y' Point.

This Half Curve - 2nd Radius track measures at 111mm in length, has a Radius of 438mm and an arc of 11.25°.

This set of seven piers in various heights clip to the underside of Hornby track to create a smooth incline, whether it's straight or curved track....

Designed to fit curved or straight track on piers R658 and R659.Total length: 1220mm. Elevated Track Running Length The maximum track running...

The point motor is designed to allow for the convenient electrical operation of points. The point motor also has a 5 pole skew wound and measures a...

Provides a base to mount Point Motor R8014 above the baseboard, with a model trackside hut to conceal it. Comes with variable extension arm that al...

Measures at 168mm long with a curve radius of 438mm and an arc of 22.5°.

Measuring at 168mm in length along the straight and covering a second radius (438mm) curve of 22.5°. Hornby points are supplied for operation by ha...

Each track has a radius of 438mm and arcs at 22.5° and 33.75°. Hornby points are supplied for operation by hand and they may be converted to remote...

Each track has a radius of 438mm and arcs at 22.5° and 33.75°. Hornby points are supplied for operation by hand and they may be converted to remote...